2C Mixing Head 

The marco 2C Mixing Head combines a two-component mixer device with the flexibility of a dispensing head. Where previously two process steps were necessary to produce the mixed 

medium and dispense it onto the workpiece, this allows the medium to be mixed directly before dispensing. The built-in stepper motors produce a highly precise mixing ratio with a tolerance of less than 0.5% by volume. Hardening of the mixed medium in the machine or tubing is prevented. Only the mixing spiral in contact with the mixed material needs to be replaced. 

In addition, a dynamic mixer with separate motor is available. In applications with large differences in mixing ratio or high demands on homogeneity, they are clearly superior to static mixers. Specially developed modular mixing spirals produce homogeneously mixed dispensing results. 

An automatic changeover mechanism is also available, raising the degree of automation for 

2C dispensing even further.